Your shopping cart is empty!
EQKIT Audio Spectrum 8×4 DIY Kit Level Indicator Voice Spectrum Lights Red+Blue Colorful Display
Product Code: 6392756
Availability: In Stock
Availability: In Stock
$14.99
Ex Tax: $14.99
Ex Tax: $14.99
Product Description
Description:
This is a kit parts. You should solder it by yourself.
Features:
1. High sensitivity;
2. Low power;
3. Wide operating voltage range;
4. Low power consumption;
5. DIY design;
6. Colorful display;
7. Mode adjustable;
Parameter:
| No. | Parameter | Value |
| 1 | Model | ASD-84 |
| 2 | Standby current | Less than 1mA |
| 3 | Soldering difficulty Level | Easy |
| 4 | Working voltage | DC 5V |
| 5 | Display LED | 8*4 |
| 6 | Display color | Red+Blue |
| 7 | LED Size | 2*5*7 |
| 6 | PCB Size | 94*39.5mm |
Instructions:
Step 1: Complete the installation in the normal way following installation manual and schematic. (Please request separately).
Step 2: Connect audio;
Step 3: DC 4-9V voltage;
Step 4: Adjust the working mode
Step 5: Test and use.
Mode setting:
| Mode | Set Method | Remarks |
| Factory Testing Mode | Press button S1 before Power on | It is used to detect all LED whether can be ON |
| Fast Flashing Mode(3) | Short press S1 less than 1second | The refresh frequency is very fast |
| Medium Flashing Mode(2) | Short press S1 less than 1second | The refresh frequency is general |
| Slow Flashing Mode(1) | Short press S1 less than 1second | The refresh frequency is slow |
| High Sensitivity Mode(H) | Long press S1 more than 2second | It can detect weaker audio signals |
| Medium Sensitivity Mode(B) | Long press S1 more than 2second | It can detect general audio signals |
| Low Sensitivity Mode(L) | Long press S1 more than 2second | It can filter more interference audio signals |
Using attention:
1. Please make sure all the components in the right direction and right place.
2. Please check whether pseudo/float welding. This is very important.
3. The soldering iron can't touch the components for a long time, otherwise, the components will be damaged because of the high temperature.
4. It is recommended to use a stable power supply, otherwise, it may interfere with the audio signal output.
Component list:
| NO. | Component Name | PCB Marker | Parameter | Quantity |
| 1 | Metal Film Resistor | R15 | 10ohm | 1 |
| 2 | Metal Film Resistor | RX1-RX4,RY5-RY12 | 47ohm | 12 |
| 3 | Metal Film Resistor | R13-R14 | 470K | 2 |
| 4 | Ceramic Capacitor | C5 | 0.001uF 102 | 1 |
| 5 | Ceramic Capacitor | C2-C4 | 0.1uF 104 | 3 |
| 6 | Electrolytic Capacitor | C1 | 220uF | 1 |
| 7 | Red LED | D1-D16 | 2*5*7mm | 16 |
| 8 | Blue LED | D17-D32 | 2*5*7mm | 16 |
| 9 | Audio Socket | J2,J3 | SMD3P | 2 |
| 10 | Power Socket | J1 | DC3.5 | 1 |
| 11 | WD1084 | U1 | DIP-16 | 1 |
| 12 | Button | S1 | 6*6*5 | 1 |
| 13 | USB to DC Cable | 100cm | 1 | |
| 14 | Audio Cable | 100cm | 1 | |
| 15 | PCB | ASD-84 | 94*39.5mm | 1 |
Application:
1. Electronic teaching
2. Exercise soldering skills
3. Circuit application
Frequency asked questions:
1. Why can't work?
A: Please make sure all components in the right direction and right place and check whether pseudo/float welding. This is very important.
Install tools you need preliminary preparation by yourself:
1>. Soldering iron;
2>. Multimeter;
3>. Solder wire;
4>. Iron stand;
5>. Diagonal cutting pliers;
6>. The screwdriver;
7>. Tweezers;
8>. Long nose pliers;
9>. Suction tin;
10>. Cleaning sponge;
11>. Screwdriver set.
Package included:
1 x EQKIT® Audio Spectrum 8×4 DIY Kit
